Hampshire Plumbing Company handles residential and commercial plumbing repair and installation serving Hampshire and Kane County. Whether you have a drain backing up, a water heater that stopped working, or a pipe that needs replacing, we take calls seven days a week from 7:30 AM to 9:00 PM. Straight scheduling. Upfront pricing. Code-compliant work.
We are a local plumber for homeowners, landlords, property managers, and businesses throughout the area.
Call (224) 339-6429 for a quote.
Good plumbing work isn't complicated, it's just done right, and that starts with showing up prepared and knowing what you're looking at. We cover the full range of residential and commercial plumbing: drains, leaks, water heaters, fixtures, sewer lines, repiping, and more. Homeowners, rental property owners, and commercial clients all get the same approach. One call, and the visit is booked.
A slow drain or a backed-up sink is usually a sign that buildup has narrowed the line. We clear blockages in kitchen drains, bathroom drains, and main lines using the method that fits the situation. For stubborn grease buildup or debris that a standard snake won't shift, hydro jetting pushes high-pressure water through the pipe to clear it completely. We scope the drain on the call so you know what to expect before anyone shows up.
A leaking pipe can hide behind a wall or under a floor for a long time before the damage becomes obvious. We locate the source using pressure testing and electronic detection methods, assess what the pipe looks like, then repair or replace the section that's failing. Slab leak detection is part of what we do. The cause is found before anything is replaced, and plumbing work is finished to the local code on every callout.
No hot water is one of those problems that stops a household in its tracks. We work on both tank and tankless units. If the issue is a failed heating element, a faulty thermostat, or a valve that's given out, we diagnose the fault and repair the component. If the unit has reached the end of its useful life, we handle the full replacement and connection. A tankless installation involves different venting and supply-line work than a standard tank swap, and we cover both.
A running toilet wastes water and raises the water bill. A dripping faucet does the same. We repair and replace toilets, faucets, sinks, and fixtures for homes and commercial properties alike. Whether it's a clogged toilet that won't clear, a kitchen faucet that needs replacing, or a full bathroom fixture upgrade during a remodel, the work is straightforward once the right parts are on hand. We confirm what's needed on the call.
A disposal that hums but won't spin, leaks at the base, or simply stops working usually needs either a targeted repair or a full replacement. We diagnose the problem, replace the unit if it's beyond repair, and make sure the drain connection is sealed and the wiring is handled correctly. Give us a call and we will get the water back on.
When a main sewer line backs up, everything downstream stops working. We handle the line that runs from the house out to the city connection. Camera inspection tells us exactly where the blockage or damage is sitting, and we clear roots, debris, or buildup before deciding whether the line needs repair or replacement. Leave the leak to us.
Low water pressure at multiple fixtures usually points to a pressure-regulating valve that's failing or a supply line that's partially blocked. We diagnose where the pressure is dropping, replace valves that are no longer holding their setting, and restore normal flow. Shutoff valve replacements, including the main water shutoff, are part of this work.
When a home keeps seeing the same pipe failures in different spots, repeated spot repairs stop making sense. Older galvanized steel lines corrode from the inside out, and the repair-versus-replace calculation tips toward replacement once the failures become frequent. A partial repipe addresses the worst sections. A whole-house repipe replaces all the supply lines at once. We scope the job on the call and let you know what the work involves before anything is scheduled.
We handle the gas line that feeds water heaters and kitchen appliances. If a connection is leaking, a line needs extending for a new appliance, or a shutoff valve needs replacing, that work falls on the plumbing side of the job. We do not service furnaces, boilers, or HVAC equipment. The line and the connection to the appliance are what we cover.
Before a small leak turns into water damage, the right move is to get someone on the phone who can tell you what you're dealing with. We take emergency calls from 7:30 AM to 9:00 PM, every day of the week. A burst pipe, a sewer backup, no hot water, or a major leak are all situations we handle on short notice.
When you call, we scope the problem on the phone, confirm the price, and schedule the visit. Plumbing visits are scheduled without the runaround. Sound pipes. Solid workmanship. Straight answers.
Call (224) 339-6429 to get the repair started.
Hampshire sits in a stretch of Kane County where flat terrain, heavy spring rain, mature trees in established neighborhoods, and hard municipal water all show up regularly in the plumbing calls we take. The three services below come up often here for specific reasons, and we handle each one as a routine part of what we do.
Kane County's relatively flat landscape means water from heavy rain or snowmelt has nowhere to go quickly. Basements here take on water when the ground is saturated and the drainage has nowhere to route it. A properly installed sump pump, set in a pit at the lowest point of the basement floor with a correctly routed discharge line, moves that water out before it becomes a flood. We size the pump to the pit, route the discharge away from the foundation, and make sure the float switch is set correctly. One call, and the repair is scoped.
Hampshire's older neighborhoods have mature trees, and mature trees have roots that travel toward moisture. Clay sewer lines and older cast-iron pipe are particularly vulnerable. Roots find the joints, work their way in, and eventually block the line entirely. We run a camera through the line to see exactly where the intrusion is, clear the roots with the right cutting tool, and assess whether the line needs a spot repair or a longer section replaced. Catching it early keeps the repair smaller.
The water supply in Kane County runs hard. High mineral content, primarily calcium and magnesium, builds up inside pipes, shortens the life of water heaters, and leaves scale on fixtures and appliances. A water softener connected to the main supply line treats the water before it reaches any of those points. We size the softener to the household's usage, make the supply-line connection, and install a bypass valve so the unit can be serviced without shutting off the whole house. The person who answers the phone can tell you what the repair involves.
For busy homeowners and property managers, the goal is always the same: get the problem diagnosed, get a price, and get it fixed without a lot of back-and-forth. For homeowners, that includes everything from a leaking pipe under the kitchen sink to a full bathroom remodel that needs new supply and drain rough-in. Kitchen renovations, fixture upgrades, and whole-house repiping all fall under the residential work we handle.
Commercial clients, including property managers, multi-family building owners, retail spaces, and office buildings, need plumbing work that holds up and meets the standard the next inspection expects. Plumbing done to the standard the next inspection expects is what we bring to every commercial callout, whether it's a toilet replacement in a rental unit or a water heater swap in a commercial building.
Keeping a home dry starts with the pipes behind the walls, and knowing what a repair will cost before the work starts makes the whole process easier. When you call, we go over the job on the phone, confirm the rate, and cover what the visit includes before anything is scheduled. There is no separate call to get a price. The quote and the scheduling happen in the same conversation.
We serve Hampshire and the surrounding area, including Gilberts, Pingree Grove, Sleepy Hollow, Huntley, Algonquin, Carpentersville, and Burlington. Drains that run clear. Faucets that don't drip. Pipes that hold.
A burst pipe, a major leak that is actively causing water damage, a complete sewer backup, or a sudden total loss of hot water are all situations that warrant an emergency call. Emergency calls are answered, so reach out as soon as the problem starts. When you call, describe what is happening and we will scope the situation on the phone and get the visit scheduled as quickly as the schedule allows.
If the repair involves the main water line, a sewer line, a gas line connection to a water heater, or anything behind a wall or under a slab, call a plumber. A DIY fix on a supply line or shutoff valve can work in straightforward situations, but a mistake on a pressurized line or a sewer connection can cause more damage than the original problem. If you are unsure whether the repair is within scope for a homeowner, describe the situation on the call and we will give you a straight answer.
Low pressure at a single fixture usually points to a clogged aerator or a partially closed shutoff valve at that fixture. Low pressure throughout the house points to a failing pressure-regulating valve, a partially closed main shutoff, or buildup inside the supply lines. We diagnose where the pressure is dropping before recommending any work, because the fix depends on where in the system the problem sits.
Kane County's clay-heavy soil does not drain quickly, and flat terrain means water from heavy rain or snowmelt has nowhere to route during wet periods. Without a functioning sump pump, basements in this area are vulnerable to water intrusion when the ground is saturated. A properly installed pump with a correctly sized pit and discharge line moves water out before it reaches the floor.
Mature trees send roots toward moisture, and older sewer laterals made of clay or cast iron have joints and small cracks that roots can enter. Once inside, roots grow and eventually block the line entirely. We camera-inspect the line to locate the intrusion, cut and clear the roots, and assess whether the pipe needs a spot repair or a longer section replaced.
The water supply in Kane County runs high in calcium and magnesium, which deposits scale inside pipes, water heaters, and fixtures over time. Scale buildup inside a water heater tank reduces efficiency and accelerates wear on the unit. A water softener connected to the main supply line treats the water before it reaches those components, which extends the working life of the plumbing system.
The visit starts with the plumber confirming the scope of the job and locating the fixture, pipe, or access point that needs attention. For diagnostic work like leak detection or a sewer camera inspection, the cause is identified before any repair work begins. Once the problem is located and the approach is confirmed, the repair or installation is completed and the work is checked before the visit is closed out.
Someone with access to the property and the ability to point out the problem area needs to be present. For rental properties, a tenant or property manager who can provide access and describe the issue works as well. If access arrangements need to be coordinated, cover that on the call when the visit is scheduled.
Empty the cabinet under any sink that needs work. Clear the area around the water heater so there is room to work and inspect the unit. If the job involves the main shutoff or a valve in a utility area, make sure the path to it is clear. Knowing where the main shutoff is located before the visit saves time, particularly on emergency calls.
If the job turns out to involve more than what was described on the call, we go over the additional scope before proceeding. Common reasons for a scope change include discovering a second leak once the first is repaired, finding that a pipe section is more deteriorated than the symptoms suggested, or needing to open a wall to reach a fitting that was not accessible from the outside. Nothing additional starts without that conversation.
A patch makes sense when the pipe is otherwise in good condition and the failure is isolated. When the same pipe section has failed more than once, when the material is corroded throughout, or when a home has galvanized steel supply lines that have narrowed with rust, replacement is the better call. Repeated spot repairs on a deteriorated line cost more over time than addressing the underlying problem.
Hampshire Plumbing Company takes calls seven days a week from 7:30 AM to 9:00 PM. Whatever the job, the price and the scope are settled on the call before anything is scheduled.
Call (224) 339-6429 for a quote.
We cover the full range of residential and commercial plumbing work, from a backed-up drain to a whole-house repipe. Every visit starts with a clear scope and a confirmed price before any work begins. The table below lays out what each service covers, who it fits best, and one practical detail worth knowing ahead of time.
Call (224) 339-6429 to go over your situation and get a quote.
| Plumbing Service | What's Included | Typical Situations | Good to Know |
|---|---|---|---|
| Sump Pump Installation |
| Kane County homeowners with basements prone to water intrusion during heavy rain or snowmelt | The flat terrain and clay-heavy soil in this area means water has nowhere to route quickly when the ground is saturated. A correctly sized and routed pump is the most reliable way to keep a basement dry. |
| Whole-Home Repiping |
| Older homes with repeated pipe failures or corroded galvanized lines | When the same line fails in different spots more than once, the repair-versus-replace calculation usually tips toward replacement. We scope the job on the call so you know what the work involves before anything is scheduled. |
| Garbage Disposal Service |
| Kitchens where the disposal hums, leaks at the base, or stops working entirely | A disposal that hums but will not spin often has a mechanical jam rather than an electrical failure. Diagnosis determines whether a repair or a replacement is the right call. |
| Leak Detection & Repair |
| Anyone noticing unexplained water damage, high bills, or damp walls | The cause is confirmed before any repair work begins, which keeps the scope accurate and the repair targeted. |
| Emergency Plumbing |
| Any situation causing active water damage or a complete loss of water or heat | Emergency calls are answered when you reach out. The problem is scoped on the phone and the visit is scheduled as quickly as the schedule allows. |
| Water Heater Repair & ReplacementMost Popular |
| Households with no hot water, inconsistent temperature, or an aging unit | A tankless installation involves different venting and supply-line work than a standard tank swap. Both are handled in a single visit when the scope is clear. |
| Faucet & Fixture Installation |
| Homeowners upgrading fixtures or dealing with persistent drips and leaks | We confirm what parts are needed on the call so the visit covers the full job rather than requiring a follow-up. |
| Water Softener Installation |
| Kane County households dealing with scale buildup on fixtures, appliances, and water heaters | The water supply in this area runs high in calcium and magnesium. Scale inside a water heater tank reduces efficiency and shortens the life of the unit. A softener on the main supply line treats the water before it reaches any of those points. |
| Sewer & Main Line Service |
| Homes with multiple slow drains, sewage odors, or a full backup | A camera inspection locates the exact point of blockage or damage before any digging or repair work is scoped, which keeps the job from growing beyond what is needed. |
| Water Pressure & Shutoff Valve Repair |
| Homes with low pressure at multiple fixtures or valves that no longer hold their position | Low pressure at a single fixture and low pressure throughout the house point to different causes. We diagnose where the drop is occurring before recommending any part replacement. |
| Drain Cleaning & Clog Removal |
| Homeowners and landlords with slow or backed-up drains | Hydro jetting clears buildup that a standard snake leaves behind, and it works on the full diameter of the pipe. |
| Toilet Repair & Installation |
| Homeowners, rental properties, and commercial restrooms | A running toilet can waste a significant volume of water before the problem becomes obvious on a bill. A quick diagnosis usually identifies whether it is a flapper, fill valve, or a more involved issue. |
How do I know if my water heater needs repair or full replacement?
A water heater that is producing lukewarm water, making rumbling or popping sounds, or showing rust-colored water at the hot faucet often has a repairable component, such as a heating element, thermostat, or anode rod. A unit that is leaking from the tank itself, has visible corrosion on the exterior, or has been failing repeatedly over a short period is usually past the point where repair makes economic sense. We diagnose the unit on the call and go over both options before anything is scheduled.
What is the difference between snaking a drain and hydro jetting?
A drain snake breaks through a clog and creates an opening, but it does not clean the walls of the pipe. Grease, soap scum, and mineral buildup can remain and cause the line to clog again quickly. Hydro jetting sends high-pressure water through the full diameter of the pipe, clearing buildup from the walls rather than just punching through the blockage. It is the better choice for kitchen lines with grease accumulation or any drain that keeps backing up after snaking.
How can a leak be hidden inside a wall or under a slab?
Supply lines run through walls and under concrete slabs, and a pinhole leak or a failing joint can lose water slowly for a long time before the damage becomes visible. We use pressure testing to confirm whether a leak is present and electronic detection methods to locate it without opening the wall or floor unnecessarily. The source is identified before any repair work begins, which keeps the scope accurate.
Cause Found Before Anything Is Replaced
We locate the source of a leak or a drain problem before recommending any repair. A correct diagnosis keeps the scope accurate and avoids replacing parts that were not the issue.
How do I know if a clog is at the fixture or deeper in the main line?
A clog at a single fixture, such as one slow sink or one toilet that drains poorly, usually points to a blockage in that fixture's branch line. When multiple fixtures in different parts of the house are slow at the same time, or when using one fixture causes another to back up, the problem is typically in the main line. We scope which part of the system is involved on the call so the right approach is used from the start.
What are the signs of a sewer or main line problem?
Multiple slow drains throughout the house, gurgling sounds from toilets or drains when water runs elsewhere, sewage odors inside or near the foundation, and wet patches in the yard above the sewer lateral are all signs the main line may be involved. A camera inspection of the line is the most direct way to confirm what is happening and where.
What is a slab leak and how is it located?
A slab leak is a leak in a supply or drain line that runs beneath the concrete foundation of a home. Common signs include warm spots on the floor, a water meter that keeps moving when no fixtures are in use, or unexplained increases in the water bill. We use pressure testing and electronic detection to locate the leak without breaking up concrete unnecessarily. Once the position is confirmed, we go over the repair options before any work begins.
Code-Compliant Work on Every Job
Every repair and installation is completed to the standard the local code requires. That matters whether the job is a faucet swap or a full repipe.
What causes a faucet or fixture to drip or leak?
Most faucet drips come from a worn washer, O-ring, or cartridge inside the valve body. Over time, these components wear against the seat and stop sealing completely. A drip at the base of the faucet usually points to a failed O-ring or a loose connection at the supply line. Left alone, a steady drip adds up on the water bill and can cause cabinet damage below the sink. The repair is usually straightforward once the faucet is opened and the worn part is identified.
How long does a water heater replacement typically take?
A standard tank water heater replacement, where the new unit is the same type and size as the old one, is generally completed in a few hours once the visit is underway. A tankless installation takes longer because it involves different venting, gas or electrical connections, and supply-line work. We go over the scope on the call so you have a realistic picture of what the visit involves before it is scheduled.
Straightforward Scheduling
The price and the scope are settled on the call before the visit is booked. There is no separate call to get a quote and no back-and-forth to get on the schedule.
What happens when a sump pump fails during a heavy rain?
A failed sump pump during a heavy rain event means water that would normally be pumped out of the pit accumulates in the basement instead. In Kane County, where clay soil holds water and the terrain does not drain quickly, this can result in water on the floor within hours of a storm. If the pump has stopped running, is running constantly without reducing the water level, or the discharge line is blocked or frozen, those are all situations worth a call. We go over what the pump is doing on the phone and determine whether a repair or a replacement is the right next step.
Does plumbing work need to meet a code standard?
Yes. Plumbing work in Illinois is subject to state and local code requirements that cover pipe materials, connection methods, venting, and water heater installation among other things. We complete plumbing work to the standard the next inspection expects on every callout, whether the job is a single fixture replacement or a whole-house repipe.
How are estimates and pricing handled before the work starts?
When you call, we go over the job on the phone, confirm the rate, and cover what the visit includes before anything is scheduled. The quote and the scheduling happen in the same conversation. If the scope changes once the work is underway, we go over the additional work before proceeding. Nothing additional starts without that conversation.
Call (224) 339-6429 to go over your plumbing situation, get a price, and schedule the visit.
(224) 339-6429